Flat Type Proximity Sensor - Hanyoung Nux UP

Flat Type Proximity Sensor – Hanyoung Nux UP

Applied exclusive IC for C-MOS
Wide range of power supply voltage(5-35 V DC : DC 3 wire type)
Internal noise enhanced circuit
Applied the 2 wire type proximity none polarity
Able to install at metal surface directly Sensing distance 8m, thickness 10.5mm Flat type

Enquiry

Applied exclusive IC for C-MOS
Wide range of power supply voltage(5-35 V DC : DC 3 wire type)
Internal noise enhanced circuit
Applied the 2 wire type proximity none polarity
Able to install at metal surface directly Sensing distance 8m, thickness 10.5mm Flat type

Specification

Inductive D.C 3 wire type/2 wire type

Model		D.C 3 wire type		D.C 2 wire type
		NPN	UP25F-8N	Polarity	UP25F-8T
		PNP	UP25F-8P	No Polarity	UP25F-8U
Size		25 X 49 Flat type		25 X 49 Flat type
Standard sensing object(㎜)		Iron 25 X 25 X 1
Sensing distance		8 mm
Setting distance		0 ~ 6.4mm
Hysteresis		Less than 10% of sensing distance
Response frequency		200 Hz
Power supply voltage		12 – 24 V a.c (Usable voltage range 5 – 35 V d.c)		12 – 24 V a.c (Usable voltage range 10 – 30 V d.c)
Control output	Open/Close capacitance	200 mA max (Resistive load)		100 mA max (Resistive load)
	Residual voltage	Max 1.5 V		Polarity : max 3.5 V, No polarity : max 5 V
Current consumption		Max 6 mA		–
Leakage current		–		Max 1 mA
Operation indication		Red LED
Protective circuit		Power reversely connected protective circuit, Surge protective circuit and over current protective circuit are built in.
Degree of protection		IP67 (IECstandard)
Connection structure		Cable type(Standard cable length 2m), Relay connector type
Material		Case : PBT resin, Cable holder : Polyester elastomer
Weight	Cable type	approx. 60g		approx. 60g
	Relay connector type	approx. 20g		approx. 20g

Inductive A.C 2 wire type

Model		UP25F-8A
Standard sensing object(㎜)		Iron 25 x 25 x 1
Sensing distance		8 mm
Setting distance		0 ~ 6.4mm
Hysteresis		Less than 10% of sensing distance
Response frequency		20 Hz
Power supply voltage		100 – 240 V a.c (Usable voltage range 90 – 250 V a.c )
Control output	Open/Close capacitance	200 mA max (Resistive load)
	Residual voltage	Max 10 Va.c
Leakage current		Max 2.2 mA
Operation indication		Red LED
Protective circuit		Surge protective circuit built in.
Degree of protection		IP67 (IEC standard)
Connection structure		Cable type(Standard cable length 2m), Relay connector type
Material		Case : PBT resin, Cable holder : Polyester elastomer
Weight	Cable type	approx. 60g
	Relay connector type	approx. 20g

Model	Code						Information
UP	25	F-	8				inductive type proximity sensor
Sensing area size	25						please refer to the dimension (25 x 49 x 10 mm)
Structure type		F					Flat type
Sensing distance			8				8 mm
Power and Output type				N			D.C NPN output
				P			D.C PNP output
				A			A.C 2 wire type
				T			D.C 2 wire type(Polarity)
				U			D.C 2 wire type (No polarity)
Output state					A		Normal open(N.O)
Output state					C		Normal close(N.C)
Connection structure						*	No indication (Cable type)
Connection structure						CR	Relay connector

There are no reviews yet.

Be the first to review “Flat Type Proximity Sensor – Hanyoung Nux UP”